Use of Turbine to Generate Electricity

There are different advancements that are made in the field of technology. Technology has made our life easier and more convenient. The tasks that were considered impossible are now possible. There is possibility of creating anything. One field which has been helped tremendously is manufacturing field. You can take example of any unit and you will see that maximum work is done with the help of machines only. This has not only saved time but also the human effort has been reduced. Overall, this has led to increase in the productivity of the company. All of the above mentioned things are also true for a steam turbine. With the help of a steam turbine, we have the option of creating electricity in a large scale. With the help of steam turbine, thermal energy is extracted from pressurized steam and used in doing mechanical work. To do the work, there are different types of steam turbines. One of them in this regard is a single stage steam turbine.

A single stage steam turbine is a turbine in which water flows on through a single stage blade. It has only one set of stationary blades or nozzles and one set of rotating blades. There are different reasons for using a single stage steam turbine. Some of the advantages of using it are –

1. High efficiency blading.

2. There is presence of keyed and shrunk wheel on shaft.

3. High capacity thrust bearing for positive rotor location.

4. It has internal oil reservoir.

5. The case oil seals are stationary, replaceable and non-sparking.

6. It has presence of oil rings and trip lever.

7. The carbon-ring packing is angled and unique.

8. Industrial type Babbitt lined journal bearings.

9. Governor valve stem.

This type of turbine has use in refining, petrochemical, food processing, steel and other industries for lube oil pumps, process pumps, feed water pumps, fans, compressors and generators.

N S Terbo is the leading manufacturers of single stage steam turbine. We manufacture these designs with the help of contemporary technology and modern tools.

NS Energy Groups

A-7/111,GT Rd, South Side Industrial Area, Ghaziabad, Uttar Pradesh 201009

Customer care: +(91)-8081918191

Email: info@nsenergygroups.com, marketing@nsenergygroups.com

https://www.nsenergygroups.com

Offering of the Best Quality Power Plants

It is not an easy task to start your own business. And when that business consists of big machines, then the main headache will be of those machines only. In a manufacturing unit, most of the work is done with the help of machines only. This is because they are highly convenient. The work that is done by them is not possible to do by human beings. Not only the time is saved, but the efficiency of the workplace is also increased. We have become so much dependent on them that we cannot imagine to do any work without their aide. This is why it is important to buy those machines which are reliable as wells as cost effective.

In a thermal plant, there is need of power plant. A power plant is that machine which provides power to a definite sector or area. A power plant should be bought from a trusted place only. A lot of money is involved and therefore lot of consideration should be given. This is where engineering procurement and construction (EPC) is an important aspect. If we look at all the EPC service provider in India, then N S Thermal is the first name that comes to the mind.

N S Thermal is the finest plant maintenance company in India. EPC deals with all the things that are needed in delivering a power plant. A power plant epc company has epc contractors present who are responsible for each and every thing. It includes design, engineering, procurement, construction, commissioning and handover of the project. It can be termed as a form of a contracting arrangement so that both the sides are mutually benefitted.

We understand what the needs of the client are and provide tailor made power plants to them. While we give our services, we make sure that the efficiency of the company is increased. We have expert engineers with us who provide assistance if there is any problem related to the EPC work. N S Thermal Energy is a power plant epc company which is known for its fine finish and high quality.

NS Energy Groups

A-7/111,GT Rd, South Side Industrial Area, Ghaziabad, Uttar Pradesh 201009

Customer care: +(91)-8081918191

https://www.nsenergygroups.com

Electricity Generation with the Help of Steam and Power Plants

Without any doubt, electricity has become a very important part of our daily lifestyle. We cannot imagine our life without the help of electricity. It won’t be wrong to say that we have become dependable on these products. Our life is filled with numerous latest gadgets that require use of electricity. With our daily habits, it has become difficult to live off the grid. Now, when something is this important to you, you will need to have it available round the clock. In case of electricity, we have different sources for its production. In all of these sources, the end result is the production of electricity. Two of the most common ways of electricity generation is steam power plant and thermal power plant.

A thermal power plant uses the help of heat energy. In this process, heat energy is converted to electric power. There are different sources of energy that are used in the production of electricity. These sources are used according to the need. Some of the most commonly used energy sources are coal, petroleum etc. It may seem that all the processes may be same with only energy source being different, but that is not the case. The whole arrangement is different from each other. Initial construction cost of the setup is cheaper. As they are located in urban areas, connectivity is not an issue. If there is something that is needed for the location, you can buy it easily. It should be noted that minimum damage to environment is caused.

In the case of steam turbine, electric generator is driven by steam. Steam is created with the help of water that is heated and it spins the steam turbine. Major electricity production is done with the help of a steam turbine. The efficiency of a conventional steam turbine is between 33 – 48 percent. Fuel used in a steam turbine is quite cheap and the setup does not require much space.

N. S. Terbo is the largest manufacturer of thermal and steam power plant. You will get power plants of highest quality here.

Altering the Shape of the Workpiece According to the Requirement

Almost every industry uses machines to perform any given work. Be it small scale, medium scale or large scale, machines will be everywhere. In fact, the basic function of an industry is to generate work by using machines. These machines help us in increasing the efficiency and sharing the workload of human kind. Whatever work we want to do, getting the right kind of machine is the first step. There is nothing that cannot be performed by the machines. And this fact holds true for every industry. If we talk particularly about a pressing machine, then there are smaller parts which are necessary to do the required work. Industrial press is an important component in that matter.

In a press industry, there are different operations performed by different machines but the objective of these machines is to alter the shape of the work piece. The same can be said for an Industrial Press. An Industrial press is used in changing the shape by applying pressure. The workpiece that is used to bend is sheet metal. They are preferred as they have reliable functioning and due to their sturdy design, they are easy to operate. An industrial press can be differed due to various reasons. Classifying them according to their mechanism will give you three different types of presses – Hydraulic press and Pneumatic Press.

1. Hydraulic Press  – in a hydraulic press, force is generated with the help of a hydraulic cylinder. In this, hydraulic equivalent of a mechanical lever is used. There are two parts where one part is a piston which acts as a pump where less mechanical force is generated whereas other part is a piston where high amount of mechanical force is generated.

2. Pneumatic Press – In a Pneumatic press, use of gas or air that is pressurized is taken. A compressor is present in the center which powers cylinders, air motors and other pneumatic devices. They are preferred over other presses because they are cost effective, flexible in use and highly safe alternative.

NS Energy Groups

A-7/111,GT Rd, South Side Industrial Area, Ghaziabad, Uttar Pradesh 201009

Customer care: +(91)-8081918191

https://www.nsenergygroups.com

Generation of Electricity with Diesel : NS Energy Groups

Electricity is something without the help of which we cannot live in a normal manner. This is because electricity is needed in every sector. If you’re reading this, chances are, you need the help of electricity only. Lighting our homes, charging our electronic devices etc. are some of the things that are done with electricity. The advancement in the form of technology is the main reason behind this and it is commendable. Electricity goes a way back and the means of production have evolved due time. Now, if we see around us, there are various energy sources such as coal, petroleum, water, wind etc. which are needed to generate electricity. They are classified as renewable or non-renewable sources of energy. One of the most commonly used in this sense is diesel based power plant.

If we see the normal functioning in the production of electricity, then the rotor of the alternator is rotated with the help of a prime mover. This prime mover generally alternates as the main energy source. A diesel based power plant, as the name suggests, uses diesel as the main energy source. It is one of the most popular methods of generating electricity. This type of power station is known as diesel power station.

A diesel power station is most ideal for a small scale industry. There are many advantages for using diesel power plant. Some of the main advantages are given below –

1. The design of a diesel power plant is very simple.

2. It requires small amount of space.

3. The starting of this generator is quick and can be started within a few seconds. Stopping of the power plant is even quicker.

4. There is no standby loss in the system.

5. As it requires less amount of water, cooling is easy.

6. If we compare diesel power plant to that of coal, then its efficiency is quite higher.

Diesel Power Plant consists of a fuel supply system, air intake system, exhaust system, cooling system, lubricating system, engine starting system etc. At N.S. Thermal Energy, you will get comprehensive array of diesel power plant.

NS Energy Groups

A-7/111,GT Rd, South Side Industrial Area, Ghaziabad, Uttar Pradesh 201009

Customer care: +(91)-8081918191

https://www.nsenergygroups.com

Cutting of Metals has Never Been This Easy

The main reason why we have manufacturing units is so that all the complex processes can get completed in a simple manner. Various different jobs that are not possible with the help of humans are the main reason why we have machines amongst us. Along with the reduced workload, overall efficiency of the workplace is increased. Now when we talk about any industry where there are heavy machines involved, the above mentioned thing becomes even more important. Most of the major work is done by them and the same can also be said for a shearing machine. The process of shaping of a sheet metal is done by shearing machines. If we are to define shearing in a simple manner, then it is a cutting process in which sheet metal is cut into two or more pieces. This is done by applying great external force which eventually causes them to fail. Generally, sheet metals are used for shearing but in some of the cases, rods are also used.

While the process of shearing takes place, there are methods such as bending, shearing, rolling and spinning. Some of the actions that take place depend on the size of the shearing machine. Smaller machines cut the sheet machine in different angles and larger machines use straight action without the formation of any angle. There are two blades present in this process. One is fixed at an angle in a shear bed and the other one move vertically with zero or no clearance. There is requirement of operating press load to cut any specific part and that is known as operating force.

You will get different types of effective shearing machines at Monotech Engineers. Some of the types are mentioned below –

1. Mechanical Over Crank Shearing Machine – they have the tendency to work at any conditions and are corrosion resistant.

2. Mechanical Under Crank Shearing Machine – they are highly efficient and with less power consumption.

3. NC PLC CNC Hydraulic Shearing Machine – there is use of electronic panel and comes with inbuilt hydraulic power pack.

NS Energy Groups

A-7/111,GT Rd, South Side Industrial Area, Ghaziabad, Uttar Pradesh 201009

Customer care: +(91)-8081918191

https://www.nsenergygroups.com

Building Your Power Plant with Robust Components

This is the time of development all across. There hasn’t been a better time to utilize the potential of technology. We are living in the age where there are machines everywhere and are used in every sector. These machines are used to share the workload and make our life easier. This will not only help us in saving our energy and time but also helps in increasing the overall productivity of our unit. It has become almost impossible to alienate ourselves from technology. We are so much dependent on it that we don’t even know if we can lead a normal life without it.

Now, if we specifically talk about power plants, then this also hold true. In general terms, a power plant is a place where electricity is generated. There are various different forms of production of electricity and that depends on the use of energy source. For example - a thermal power plant produces electricity with the help of fossil fuels, a nuclear power plant produces electricity with the help of radioactive elements such as uranium, wind power plant is used to create energy with the help of wind as the main source etc. These are the main sources and electricity is produced in an efficient manner.

A power plant should have low operational cost along with easy installation. The most important point is that there should be no interruption in its function. Therefore, you should get your power plants only from a reliable source. At NS Thermal Energy, we believe in the engineering, procurement and construction of supreme grade material and highly advanced techniques keeping in mind the predefined standard of industry. There are some of the features that we keep in mind while imparting our services –

1. The efficiency of the power plant should be increased.

2. Engineering done with the help of complete design.

3. Installation of process pipe lines and steam pipe lines with proper power supply.

4. Exhaustive operation & maintenance of power plants.

5. Providing assistance in the form of expert manpower and engineers.

NS Energy Groups

A-7/111,GT Rd, South Side Industrial Area, Ghaziabad, Uttar Pradesh 201009

Customer care: +(91)-8081918191

Email: info@nsenergygroups.com

https://www.nsenergygroups.com